ELECTRICAL SFP
Consúltanos el precio
The RJ45 copper electrical SFP transceiver module supports data transfer speeds of 10/100/1000 Mbps over distances of 100 meters. It is an economical alternative to add, replace or update a copper Ethernet port in a Base-T 1000 network equipment. The module is very suitable for use in high density applications such as LAN 1000BASE-T to switch interfaces, switched backplanes, servers, etc.
Small connectable copper format transceivers (ELECTRICAL SFP) are high performance modules that comply with Gigabit Ethernet and 1000BASE-T standards, as specified in IEEE 802. 3-2002 and IEEE 802.3ab. They support 1000 Mbps data up to 100 meters over category 5 unshielded twisted pair cables. The module supports full 1,000 Mbps data links with 5-level pulse amplitude modulation (PAM) signals. The four pairs of the cable are used with a symbol rate of 250 Mbps in each pair.
CHARACTERISTICS
Bidirectional data links up to 1.25 GB / s
Coupling hot SFP
Extended case temperature range (0 ° C to +70 ° C)
Fully metallic cover for low EMI
Low power dissipation (typical 1.05 W)
RJ-45 compact connectors
1000 BASE-T operation on host systems with SERDES interface
10/100 / 1000Mbps compatible with host systems with SGMII interface
APPLICATIONS
1.25 Gigabit Ethernet networks over Cat 5 cable
CONCEPT |
ESPECIFICATIONS |
Electrical power interface |
|
Power supply |
320 mA |
Input voltage Vcc |
3,3 V |
Max voltage Vcc |
-4 V |
Electrical interface |
|
Input impedance ZIn |
50 Ohm |
output impedance Zout |
50 Ohm |
Operating conditions |
|
Storage temperature |
-40º C 85 ºC |
Working temperature |
standar 0°C + 70°C |
General specifications |
|
Data rate |
1 Gbps |
Length |
100 metros |